J.V. Converting JVCC UHMW Polyethylene Film Tape 10 mil Carrier, (UHMW-PE-10), 3/4 in. x 36 yds. (Natural/Translucent)

JVCC UHMW-PE-10 UHMW Polyethylene Film Tape is a 10 mil ultra-high molecular weight polyethylene film with an aggressive acrylic adhesive. Its high chemical and abrasion resistance and extremely low coefficient of friction makes this a versatile engineering material for many severe service applications. Materials slide freely over tape surface with no-slip/stick tendency. High impact strength and shock-absorbing properties. Outwears Teflon many times over and is a good replacement when high-temperature resistance is not a requirement. Applications include: rub strips on conveyors; bearings and sliding surfaces; chutes and hopper liners; dead plates; wear pads; guide rails; tool tables and fences; furniture and drawer slides/runners. UHMW polyethylene tape is used primarily in automotive and mechanical applications. Wound on either a blue film or white paper release liner. Country of Origin: United States.

• JVCC UHMW-PE-10 UHMW Polyethylene Film Tape is a 10 mil ultra-high molecular weight polyethylene film with an aggressive acrylic adhesive. Its high chemical and abrasion resistance and extremely low coefficient of friction makes this a versatile engineering material for many severe service applications.
• *** Wound on either a blue film or white paper release liner.
• Applications include: rub strips on conveyors; bearings and sliding surfaces; chutes and hopper liners; dead plates; wear pads; guide rails; tool tables and fences; furniture and drawer slides/runners. UHMW polyethylene tape is used primarily in automotive and mechanical applications.
• Materials slide freely over tape surface with no-slip/stick tendency. High impact strength and shock-absorbing properties. Outwears Teflon many times over and is a good replacement when high-temperature resistance is not a requirement. Carrier/Backing: UHMW (Ultra High Molecular Weight) polyethylene film. Adhesive: acrylic.
• Thickness: 15.8 mils (carrier, adhesive, liner) 11.8 mils (carrier, adhesive) 1.8 mils (adhesive) 10 mils (carrier) 4 mils (liner). Adhesion: 50 ounces per inch (to stainless steel test panel). Tensile Strength: 60 pounds per inch (longitudinal). Service/Operating Temperature: up to 300F. Elongation: 300%. Core: 3-inch diameter.